This product was manufactured by Agilent or Hewlett-Packard many years ago. We provide this page to assist you in using or replacing your product.
If this product's status is "Discontinued": This product is no longer sold by Agilent, but is still fully supported. You can receive free enhanced self-support via the Agilent website or (if you have a valid support agreement with Agilent) by calling or emailing the Agilent Contact Center. Repair and calibration agreements and per-incident services are available from Agilent Service Centers. You can reach Agilent by using the "Contact Us" link at the top right of this page.
If this product's status is "Obsolete": You can receive free self support via the Agilent website only; technical support is not available through other Agilent support channels. Calibration may still be available from an Agilent Service Center if no repair or parts are needed.
Agilent 81623A Optical Head
Specifications at a glance for the 81623A:
- Wavelength Range: 750 to 1800 nm
- Detector Type (Sensor Element): Germanium
- Detector Size (diameter): 5 mm
- Power Range: +10 to -80 dBm
- Wavelength Accuracy (Uncertainty): +/- 3.5% (1000 to 1650 nm)
- No Analog Output
Additional Information
The Agilent optical power heads are specially designed for low PDL, low spectral ripple and high return loss and are used for optical component test. The heads come with a magnetic D-shape adapter and provide a safe stand. The optical heads have to be operated with the single (Agilent 81618A) or dual (Agilent 81619A) interface modules.
These modules are controlled in any configuration in any of the mainframes 8163B, 8164B and 8166B. A highly flexible connector interface palette addresses connectorized, bare fiber or open beam applications.
